Electrical in the UAE

Home Lighting in Dubai

And so you got tired of the old furniture or you bought a new house or apartment in Dubai and decided to renovate. Choosing various finishing materials, you involuntarily pay attention to various lighting fixtures, chandeliers, sconces, lamps. After all, properly selected lighting can create a certain comfort in your home and give your home a certain style.

If you have used the designer's service, he will help you choose lamps and chandeliers, place switches and lighting schemes. If you come up with the design yourself, it is best to resort to the help of an experienced electrical engineer, describe your design vision to him, describe or show the lamps. With it, you can place switches that will control a lamp or a group of lamps. It should be noted that the lamp can be switched on or off from several places. If you have many lighting groups in a room, you can think about an integrated lighting control system, elements of the smart home system

If you have plasterboard ceilings and you have chosen mortise lamps for installation in the ceiling, then it is advisable to buy them or, for example, walk one before the start of painting work, since different lamps have different mounting methods and different seating diameters.

Recently, LED lamps have appeared on the market that differ favorably from conventional halogen lamps with increased service life, efficiency, since 3.5 watts. LED bulbs are equal to 35 watts. Ordinary halogen. The light temperature of the LED bulbs can also be selected from cold to warm.

The cost of LED light bulbs is two to three times higher and averages 25-35 hryvnia. It is also possible to use energy-saving lamps, but they also have disadvantages, they are not suitable for all types of lamps and they cannot be connected via a dimer (lighting regulator).

There are also mortise LED lights in various sizes and shapes. I would like to say a special word about the cornice or hidden lighting, with which you can create a highlight in any interior. Recently, this type of lighting is done using an LED strip that has different colors and is connected via a power supply. The tape is glued into an aluminum profile to increase heat transfer, and the profile is often closed with a transparent plastic reflector, which gives it the appearance of a finished lamp. With proper connection and operation, a high-quality LED strip can serve up to 45,000 hours without loss of performance.

It is especially necessary to pay attention to the organization of lighting in bathrooms. The lighting from these places should be bright, and a directional light fixture can be installed above the mirror. All fixtures in bathrooms and bathrooms must be made in a moisture- and dust-proof design and have a degree of protection of at least IP44. It is advisable to connect all electrical appliances and lighting devices via an RCD (protective shutdown device) with a leakage current of no more than 10 mA.

And so if you follow these simple recommendations in your home, with the help of lighting, you can create additional comfort and coziness in your home.