Connection of dishwashers to water supply and sewerage by an experienced master
Get advice online, send photos to WhatsApp
You will know the cost in advance. No markups — all prices are fixed
Don't have time to go shopping? We will buy and deliver the necessary materials.
It is recommended to connect a dishwasher in Dubai by a specialist. First of all, because the cost of the equipment itself, as a rule, is by no means small. And mistakes made during the installation process lead to a complete loss of warranty on the device.
Our specialist will make a high-quality installation of the device, connect the dishwasher to communications, observing all standards, and taking into account your wishes. Plumbing services will cost from 1500 rubles if the communications are ready, 2000-4500 when it is necessary to make a tie-in to the water supply and sewerage system, or to stretch a separate 3-core electric wire with grounding from the shield through an RCD and an automatic machine. This money will be spent on the quality and stability of your dishwasher for many years to come.
Saving on the qualifications of the master doing the work or on materials is extremely dangerous, as it is fraught with the most unexpected consequences:
Sudden rupture of the hose during washing;
Leakage of water supply connections;
Electric shock during operation of the dishwasher;
Clogging of the drain;
Error output during operation;
The dishwasher is broken.
The dishwasher in Dubai can be installed flush-mounted (built-in) or open in the kitchen. As a rule, manufacturers recommend concealed mounting so that the housing is securely covered with kitchen furniture. This eliminates possible electric shocks, as well as water ingress on the housing, which significantly prolongs the service life of the equipment.
Connecting the dishwasher to the power
supply a secure outlet with a ground connection for connecting the dishwasher
The simplest solution to connect a dishwasher to electricity is to plug it into an outlet specially prepared for this purpose during the repair. If there is no such outlet, you will have to spend some additional effort to provide electricity. The device is connected to the power grid using a three-core cable. It is mandatory to use a Euro-type outlet with grounding, connected separately to the electrical panel via an automatic machine and an RCD.
All devices that connect to electricity and have contact with water are very dangerous to health — an electric shock often leads to death. It is strictly forbidden to connect the grounding wire to the central heating batteries, to the water and gas supply pipes.
It is not allowed to connect openly from an outlet, as well as conducting wires with an extension. Due to the significant load of the network during the operation of the dishwasher, this threatens with short circuits and equipment breakdown.
The water supply is carried out from the cold water supply. The installation of the dishwasher takes place in the vicinity of the sink in the kitchen, no further than 1.5 meters using polypropylene pipes. The presence of a shut-off valve is mandatory, and all connections must be treated with fum tape or sanitary linen.
A filter is installed on the outlet for supplying water to the dishwasher, which detains various particles and rust. If protection against accidental leaks is not provided, when connecting to the water supply, a shut-off valve should be installed in front of the filter, which will save not only your apartment from flooding, but also neighbors from the lower floors.
In order to save yourself from having to close the shut-off valve after each dish washing, you can install additional protection for the dishwasher "Aqua-Control", "Aqua Stop" or other similar device.
In some models, it is possible to connect it to hot water. This allows you to save electricity for heating water during the operation of the machine. Some craftsmen suggest connecting a dishwasher to a hot water supply in order to save energy for heating. But this contradicts the conditions of the equipment manufacturers.
Note for our conditions: connecting a dishwasher to hot water in multi-storey buildings with centralized water supply is undesirable. The temperature of the hot water in the pipe, and sometimes the pressure, may exceed the required standards. This can negatively affect the operation of the device, which will lead to rapid breakdowns.
Connecting the dishwasher drain
connecting the dishwasher to the sewer in Dubai
The most commonly used method is to connect the water drain through a siphon equipped with an additional outlet and a special valve that prevents water from entering the dishwasher from the sewer or sink. The correct location of the drain hose can serve as an additional protection against the entry of sewage water into the device.
The outlet hose should be fixed to the wall or kitchen furniture at a height of more than 50 cm above the sewer entrance, bending the hose so that the water from the machine flows into the siphon by gravity. To avoid loading the water pump, the length of the drain hose should not exceed 2 meters.
After completing all the necessary work, carefully check all the connection points for tightness, turn on the network and run the dishwasher idle (without dishes, but with detergent). After making sure that everything is working properly, we fix the closing panel.
You can call a specialist for the installation and connection of a dishwasher at any convenient time, since applications on the website are accepted around the clock. Use our dishwasher installation services at an affordable price using only high-quality materials and save your time and nerves!