Paving slab installation on Corfu – professional services for paving garden paths, terraces, patios and driveways on the island of Corfu (Greece). We work with Corfu paving slabs of 300×300×35 mm, concrete pavers, clinker and granite cobblestones. Full cycle of works: base preparation, drainage, installation, joint grouting. For owners of private houses and country plots on Corfu who value quality and durability of the surface.
Features of paving on Corfu
Corfu is not only an island with unique nature, but also a place with special climatic conditions: high humidity, temperature changes and rainy season. Paving slab installation requires taking these factors into account. We use materials with frost resistance of F-400+, water absorption below 5% and compressive strength from 48.7 MPa, which guarantees the durability of the surface in the Greek climate. The thickness of the slab is selected depending on the load: for footpaths – 35 mm, for car parks and driveways – 50-80 mm. We also provide drainage systems and slopes for rainwater runoff, which is especially important for Corfu with its Mediterranean climate.
Stages of paving slab installation
Base preparation – marking, soil excavation (depth 200-400 mm), curb installation. Sub-base creation – laying geotextile, filling with crushed stone (100-150 mm) and sand (50-100 mm) with compaction. Slab laying – installation on a sand-cement mixture or concrete base, levelling. Joint filling – filling with sand or a special mixture with compaction. Finishing works – compaction with a vibrating plate, surface cleaning, slope checking. Minimum order – from 50 m².
Cost and pricing factors
The cost of paving slab installation on Corfu is calculated per m² and depends on the type of slab, pattern complexity, base area and the need for base preparation. Base rates: base preparation and drainage – from €15-25/m²; slab installation (straight pattern) – from €20-30/m²; slab installation (diagonal or patterned) – from €35-50/m²; curb installation – from €10-20/linear metre. The exact cost is determined after preliminary measurements. We work under a contract with a fixed estimate.
Why choose us
We use materials with confirmed characteristics: Corfu paving slabs 300×300×35 mm, concrete pavers, clinker and granite cobblestones. We use modern equipment in our work: vibrating plates, laser levels, diamond cutting machines. We provide a warranty of up to 3 years on the work performed and help with material selection. We work under an official contract, all prices are fixed.
Frequently Asked Questions
Which paving slabs are suitable for the Corfu climate?
We recommend vibro-compressed or hyper-pressed slabs with a thickness of 35 mm for pedestrian areas and 50 mm for car parks. The material must have frost resistance of at least F-400 and low water absorption (less than 5%).
Which type of base should be chosen for paths?
For footpaths, a sand-cement sub-base is sufficient. For car parks and driveways, a concrete base with a thickness of 100-150 mm is required.
How long does it take to lay paving slabs on 50 m²?
Under standard conditions (level area, straight laying pattern), the work takes 3-5 days, including base preparation, installation and finishing works.