Interior decoration of buildings is impossible without wall alignment, which is carried out using plaster. To do this, you need to invite plasterers with extensive experience who are able to apply the "dry" and "wet" method of plastering surfaces, therefore, a team of plasterers in Dubai should have a good reputation and extensive work experience, especially since teams of finishers are not uncommon. The "wet" method is a classic plaster, which is the basis for applying decorative plasters, wallpapering, whitewashing or staining. Plastering walls allows you to finish curved surfaces and the most complex architectural details, however, such work is laborious and is not carried out in the shortest possible time, for which other painting works are carried out.
If the irregularities on the inner walls are located locally, it is not necessary to plaster the entire room, and the plasterer can only treat places where the irregularities are visible to the naked eye. After they are eliminated, it remains only to invite craftsmen to carry out the final finishing. If the concrete surface or brickwork is made with maximum precision, and the irregularities remain insignificant, you can immediately apply putty or special thin-layer plaster for leveling. And aerated concrete does not need plastering, since the blocks are characterized by precise dimensions.
In buildings made of aerated concrete blocks, the decoration of Dubai premises is simpler, since the irregularities can be covered with sandpaper, sandpaper or special tools, and then the walls are plastered. If serious defects are observed on the internal walls of the building, they can be eliminated with the help of various decorative panels, sheets of drywall, wood, fibrous and magnesite boards. The successful use of modern finishing materials is directly related to the proper preparation of the substrate, and experts recommend checking the curvature of the surfaces beforehand.
After plastering, priming compounds are applied to the walls, which include various types of glue, oils, bitumen and resins, drying accelerators and pigments. Water-soluble primers of universal type are designed for the normal preparation of surfaces made of wood, plasterboard, cement plaster and concrete. Among the varieties of finishing materials, waterproofing primers with fungicidal and anti-mold additives stand out. And the finishing leveling and elimination of surface defects is carried out with the help of putty.
The modern putty mixture is a multicomponent composition, which contains various additives, filler and special binders. The putties of the first layer are intended for the initial leveling of the surface of the substrate, and then plasterers apply finishing putties, with which you can get a sufficiently smooth surface for further coloring. If it is planned to paste wallpaper in the room, it is necessary to take into account their variety, since the requirements for wall alignment depend on this factor, and plastering and finishing work must be of high quality.