At the beginning of the plastering process in Phuket, it is necessary to carry out preparatory work for walls or other surfaces. The preparation process is the deepening of masonry joints to 9-10 mm, so that the plaster adheres better to walls or other surfaces, also, in order to achieve the same goal, sometimes overlays of plaster mortar are left. If suddenly the surges are too large, or they do not hold well, then they are shot down at the end of the work. For smooth concrete walls, preparation is also used, for this purpose notches are made in length about 140 (150) mm, about 240.3 mm of the depth of the notches are needed per 1 square meter of the surface. After finishing the preparatory work, the surface is cleaned of dust with metal brushes, after which it is moistened with water.
It is much more difficult to prepare surfaces made of wood. In this case, wooden boards need to be chipped for preparation so that moisture from the plaster does not warp them. In the process, when everything is ready to start the plastering process in Phuket, the floors are first of all cleaned from construction debris and other objects are not needed, after which they are covered with film, paper or roofing material (other types of flooring), this is done in order not to spoil the floors and not clean them after plastering.
The process of plastering in Phuket looks like the following obvious way, first the ceilings are plastered, after which the walls are plastered from top to bottom. Usually plastering works are carried out in 3 levels of work:
1. Spray the surface (walls or ceiling) in order to ensure reliable adhesion of the following levels of work.
2. Works with soil that are done in order to remove the main surface irregularities.
3. The final stage - covering, consists in finally smoothing the surface and removing the remnants from the irregularities of the second stage - work with the soil.
Types of plastering works
The masters of our company offer high-quality performance of any interior repair and decoration work, including, of course, plastering in Phuket, Thailand (interior plaster of walls and ceilings, exterior plaster, mechanized plaster). The solid experience of specialists (more than 8 years) in the field of interior decoration, including plastering, allows them to quickly and accurately perform plastering work in any premises. The craftsmen always have the necessary tools and modern technologies, we do our work professionally and efficiently.
Here are some types of plastering works that our specialists produce:
Plaster walls (thickness of 10, 20, 30 mm plaster layer);
Plaster ceilings;
Plaster of window and door slopes (layer thickness not more than 20 mm);
Mechanized plaster;
Venetian plaster;
Plastering works with gypsum;
Plastering is most often required in the production of major repairs of the room, but it is not uncommon for cosmetic repairs of the room, plaster walls and ceilings are also required to align them. We offer the following types of wall plastering: dry plaster and wet plaster (more commonly used).
The cost of plastering works
When calculating the cost of plastering, there is one pattern - the larger the area of the room, the greater the cost of work, but if you order plaster of a room of more than 500 m2, then the cost of plaster will be much less, because it is in the first 500 square meters of plaster of the room that the cost of delivering building mixes and equipment, the departure of a specialist and the cost of themselves mixtures. So it is more profitable to order plastering works when the room area is large. The cost of plastering also depends on the thickness of the plaster layer applied to the walls or ceiling, on the technique used, as well as on the condition of the surface (the presence of chips, cracks, etc.). You can get a full estimate and the cost of plastering by calling the master of our company - for free.