Laying tiles abroad

Laying tiles in abroad, online recording. Creating a masterpiece begins with surface preparation. This is a meticulous and responsible process. Measure the verticality of the walls, knock down the protrusions, clean off old paint or plaster, remove dust, prime, plaster, check the compliance of the angles with 90 degrees, prepare the floor for the mark corresponding to the design, seal the strobes, prepare the podiums, sew up the basement, install a hidden hatch, check the heights of the electrical outlets, draw the tile layout, determine the direction of future trimming, sort the tiles, choose the thickness of the seam.

Tiles are laid abroad according to the project and preliminary layout. Any questions and suggestions that arise must be coordinated with the designer or the customer. The prepared mixture is applied with a special notched trowel to the tile. The tile is adjusted and fixed using crosses and wedges. Pruning is performed by a manual or mechanical machine with water supply. The holes are cut out with special devicesTiles are laid abroad according to the project and preliminary layout. Any questions and suggestions that arise must be coordinated with the designer or the customer. The prepared mixture is applied with a special notched trowel to the tile. The tile is adjusted and fixed using crosses and wedges. Pruning is performed by a manual or mechanical machine with water supply. The holes are cut out with special devices. After laying in Dubai, the UAE, the minimum regulatory period is maintained (depends on the method of laying and surface characteristics) and the tile is rubbed (jointed) with cement or polymer grout. The last step is to wipe the tiles and open the seams with protective compounds.

It is no secret for tile makers that despite the manufacturer's brand, high-quality tiles do